| BMP ID: |
2508 |
| Title: |
All pipe fittings and well control equipment must have a working pressure rating. |
| Text: |
"i....Well control equipment and other safety requirements are:(4) All pipe fittings, valves and unions placed on or connected with blowout prevention equipment, well casing, casinghead, drill pipe, or tubing shall have a working pressure rating suitable for the maximum anticipated surface pressure and shall be in good working condition as per generally accepted industry standards." |
| Source Publication Name: |
Colorado Oil and Gas Conservation Commission, Practice and Procedure, 2 CCR 404-1, Final Draft Rules 11 07 08 |
| Citation Section: |
603. DRILLING AND WELL SERVICING OPERATIONS AND HIGH DENSITY AREA RULES |
| Citation Page: |
603(i)(4) |
| Supplemental Documents: |
|
| Usage Type: |
Required |
| Timing: |
• Production / Operation / Maintenance
|
| Oil / Gas Field: |
|
| Surface Ownership: |
• Federal
• State
• Private
|
| Mineral Ownership: |
• Federal
• State
• Private
|
| Primary Contact: |
No Contact Listed |
| Phone: | |
|
Alt. Phone: | |
| Fax: | |
|
E-mail: | |
|
| Alternate Contact: |
|
| |
| Categories: |
Human Health and Safety
|
| Location: |
Colorado |
| Species: |
|
| Vegetation Types: |
|
| General Comments: |
|
| Cost-Benefit Analysis: |
|
| BMP Efficacy: |
|
| Date Entered: |
2009-02-26 09:58 UTC |
| Last Updated: |
2009-02-26 09:58 UTC |
